Underground Clay Drainage System – Densleeve
Description
Densleeve underground clay drainage system of plain-end vitrified clay pipes and fittings with flexible sleeve couplings, was developed for building drainage and associated sewerage and is manufactured to comply with the stringent requirements of BS EN295. Sizes are DN100-DN300.
Clayware
Vitrified clay plain-end pipes and fittings, manufactured in accordance with the requirements of BS EN295-1. The standard lengths of pipes are convenient for handling and laying and allow for flexible joints at sufficiently frequent intervals to enable the pipeline to withstand settlement or other ground movement after installation.
Sleeve Couplings
Manufactured in high impact polypropylene with elastomeric seals providing watertight, flexible mechanical joint assemblies, complying with BS EN295-1: System G.
Standard Coupling Seals
These are manufactured from elastomers conforming to the performance requirements of BS EN681-1. EPDM seals supplied as standard; Nitrile seals are also available for use in contaminated ground.
Joint Performance
Densleeve joint assemblies meet all the requirements of BS EN295-1. They accept angular deflection and shear resistance without leakage, when tested under an internal or external water pressure of 50kPa (5 metres head).
Aggressive Environments
The standard Densleeve pipes, polypropylene couplings and elastomeric sealing rings are resistant to attack from substances which are commonly encountered in sewers. Where more aggressive effluents or environments are present, other types of coupling seals may be required. Alternatively, Naylor has a separate division, Hathernware Thermachem, which manufactures chemical drainage – ceramic pipes for exceptional high temperature or chemically aggressive environments. Contact the Naylor Technical Sales Department for advice.
For more information such as product availability, structural performance of the pipes and details about the full Densleeve range please view or downloaded our Clay Drainage brochure. Should you require any additional information please contact us on 01226 790591 or 01592 717900 for Scottish enquiries.
Additional Information
Select to view variations:
DN 100
Product code
17036 - DN 100
Attributes
DN 150
Product code
17022 DN 150
Attributes
DN 200*
Description
*Additional Overseas sizes.
Product code
17018 DN 200*
Attributes
DN 225**
Description
** Supplied with coupling
Product code
22003 DN 225**
Attributes
DN 250*
Description
Product code
17019 DN 250*
Attributes
DN 300**
Description
** Supplied with coupling
Product code
22005 DN 300**